Model 2100C/2200B Portable Airborne Particle Counters

0.1 micron at 1.0 cfm (2100C)
0.2 micron at 1.0 cfm (2200B)
6 particle size channels
Fed-Std-209E calculations on all sizes-simultaneously
Memory for 400 count cycles of data

The Model 2100C and Model 2200B counters are reliable and easy-to-operate workhorses. A quiet, carbon-free pump provides steady vacuum power at 1.0 cfm (28.3 lpm). The built-in printer allows either immediate or delayed printing of results. Or, using Particle Vision™ PortAll™ software, data can be downloaded at the operator’s convenience from the 400-record buffer, and displayed graphically or as a table in the built-in spreadsheet.

Sensitivity down to 0.1 microns (2100C) or 0.2 microns (2200B) is achieved through the use of patented technology and HeNe lasers. Performance is assured to both JIS (Japanese Industrial Standard) and CE (European Community) specifications for performance and safety. The bright LED display makes reading the data easy and error-free. The display shows particle counts in either cumulative or differential modes, as well as the values from the optional probes for Humidity, Temperature and Air Velocity. If your task includes scanning filters, these counters can be ordered with a fan-shaped filter-scanning probe that makes this task go more quickly and accurately. The electronic version provides an audible and visual signal at the probe to help detect filter leaks.

Inert gases such as CDA and Nitrogen can be sampled with the standard counter and the optional High Pressure Diffuser. The Mass Flow Controller (MFC) option permits the sampling of Argon in addition to CDA and Nitrogen. For a fixed system, the Model 2100C or Model 2200B can be coupled with the Model 2432 manifold, allowing sequential sampling of up to 32 sample points. This combination can be an independent system or part of a computer-based FMS system.

The Model 2100C and Model 2200B offer reliability, versatility and ease-of-operation in a lightweight package. If your requirements are limited to detection of 0.2 micron and larger particles – choose the Model 2200B. If you need sensitivity at 0.1 micron, then choose the Model 2100C. Either choice will give you solid performance.

Specifications

Size Channels (µm): 
2100C 6 ch 0.1, 0.2, 0.3, 0.5, 0.7, 1.0
2200B 6 ch 0.2, 0.3, 0.5, 0.7, 1.0, 3.0, 5.0
Flow Rate: 1.0 cfm (28.3 lpm)
Flow Control: Electronic meter with rear-panel adjustment
Vacuum Pump: Carbon-free, non-contaminating reciprocating pump
Zero Count: Less than 1 count every 5 minutes
Light Source: HeNe laser
Display: Red LED, 7 digits
Outputs: Built-in printer; RS232/RS485 Serial Interface
Sample Time: 1 second to 24 hours
Hold (Interval) Time: 1 second to 24 hours
Alarm Counts: 0 to 9,999,999
Location Labels: 0 to 999, numeric
Count Data: Total counts, counts/ft3, counts/m3
Coincidence Loss: Less than 5% at 40,000 particles/ft3
FS209E Calculations: Mean of averages, standard deviation, standard error, UCL
Auto CDA Purge (2100C): Purge solenoid activated by connection to CDA
Data Storage: 400 samples
Power: 100 VAC, 115 VAC or 230 VAC; 110 watts
Size: 13.5" wide x 7" high x 22" deep (34 x 18 x 57 cm)
Weight: 
2100C 42 lbs (19 kg)
2200B 38 lbs (17.2 kg)
Accessories Included: Isokinetic Probe with Tripod; Purge Filter; Printer Paper; AC Cord; Operator’s Manual

When ordering, specify:

Basic Sensitivity: 0.1 micron (2100C) or 0.2 micron (2200B)
Power (AC): 100 VAC, 115 VAC or 230 VAC
Printer: Built-in (standard) or External (optional)
MFC option: Optional MFC for Argon sampling

Optional Accessories

Relative Humidity/Temperature Sensor
Air Velocity Sensor
Filter Scanning Probe, electronic (light and audible alarm)
Filter Scanning Probe, non-electronic
High Pressure Diffuser
32-port Manifold (Model 2432)
Particle Vision™ PortAll™ Software
Carrying/Shipping Case
Instrument Cart